Horizontal Self Priming Pumps

Prima Range


ARGAL’s Prima range of MAG drive pumps includes a self-priming model which delivers flows of 5 – 40 litres per minute. The Prima self-priming pump is traditionally used to transfer small amounts of aggressive liquids when a flooded suction cannot be achieved. The pump can be installed up to 6m above the liquid level. The Prima self-priming pump is a cost effective alternative to small spindle and sump pumps.

Max Flow Rate: 2.4m3/hr (40 litres/min)
Material Options: Polypropylene
Temperature: 90°C

Rhino Range


ARGAL’s Rhino pump delivers flows of 10 – 300 litres per minute. The Rhino pump is used as an alternative to traditional MAG drive pumps when a flooded suction cannot be achieved. Liquids can be pumped with the pump installed up to 6m above the liquid level. The Rhino self-priming pump can be used as an alternative to traditional spindle and sump pumps.

Max Flow Rate: up to 18m3/hr (300 litres/min)
Material Options: Polypropylene or E-CTFE
Temperature: up to 120°C

Hippo Range


ARGAL’s Hippo range consists of 7 models that deliver flows of 30 – 1000 litres per minute. The pump is used as an alternative to traditional Mechanical sealed pumps when a flooded suction cannot be achieved. Liquids can be pumped with the pump installed up to 6m above the liquid level. The Hippo self-priming pump range can be used as an alternative to traditional spindle and sump pumps.

Max Flow Rate: up to 60m3/hr (1000 litres/min)
Material Options: Polypropylene
Temperature: up to 90°C