Horizontal Mechanical Seal Pumps

Route Range (ZMR)


The Route Range consists of 13 models which can deliver flows of 30 – 830 litres per minute. All pumps are made from thermo-plastic polymers, using an injection moulded process. All pumps come equipped with a variety of high grade, chemical resistant, commercially available mechanical seals. This range is also available in MAG Drive versions (see TMR Range).

Max Flow Rate: up to 50m3/hr (830 litres/min)
Material options: Polypropylene or E-CTFE
Temperature: up to 120°C

Frontiera Range (ZMF & ZGF)


The Frontiera Range consists of 13 models which can deliver flows of 50 – 1500 litres per minute. The injection moulded pump bodies are reinforced with stainless steel, allowing the Frontiera Range higher discharge pressures than other pump models. All pumps are designed to accept a variety of commercially available & chemical resistant. This range is also available in MAG Drive versions (see TMF/TGF Range)

Max Flow Rate: up to 90m3/hr (1500 litres/min)
Material options: Polypropylene or E-CTFE
Temperature: up to 120°C

ZGE Range


The ZGE Range consists of 28 models which can deliver flow of up to 1700m3/hour. The ZGE is the perfect pump for large scale transfer of corrosive liquids. The wetted area of the pump is moulded from thermo-plastics thus giving a superb chemical resistance. The pump body is reinforced with stainless steel thus allowing high discharge pressures to be achieved. A large variety of commercially available chemical resistant seals may be fitted to this range of pumps.

Max Flow Rate: up 1200m3/hr
Material options: Polypropylene or E-CTFE
Temperature: up to 100°C

Saturn Range (ZMS & ZGS)


The Saturn Range consists of 15 direct and long coupled models  which can deliver flows of up to 1200m3/hr. All pumps in the Saturn range are built using a unique resin and glass fibre injection moulding process. This process gives ARGAL its most robust pump to date. The ZMS is used as a cost effective alternative to large plastic and stainless steel pumps while not compromising on chemical resistance and mechanical strength. All pumps are available with a large variety of commercially available chemical duty mechanical seals.

Max Flaw Rate: up to 1200m3/hr
Material Options: Vinyl Ester Resin + Long Glass Fibre
Temperature: up to 100°C